Every splice and every tap-off on every busway is tested at rated current during commissioning and throughout operation.
It is a critical step before operation: it establishes that the installation starts from a sound baseline.
Commissioning involves checking all busways and splices and also makes it possible to verify the design. The design must meet every building constraint: expansion, room ambient temperature, firestops, and support system.
Full validation of an installation at rated current, with an automatically generated test report.
At any point during the life of an installed sensor, an automatic report can be generated for a selected time range.
128 points checked before energization
Load testing validates the installation on the following points:
Torque check for each splice, verified under rated load.
Analyzed in relation to room ambient temperature.
Validation of installation behavior once thermal conditions have stabilized.
Identification during commissioning of the hottest elements: firestops, expansion joints, etc.
Verification that the installation complies with IEC 61439-1 and IEC 61439-6.
Current systems, including thermal cameras, quickly reach their limits: difficult access, complex interpretation, and specialist expertise required. Hotspot Tracking commissioning reliably measures every point, during commissioning and in operation.
Commissioning does not compete with structure installers: we assess the installation and its design.
Our solution makes it possible to assess every aspect of a complex busway project:
Measurements made during commissioning form the thermal baseline of your installation: the documented healthy condition of every splice at startup. Monitoring then uses that reliable baseline to track each deviation over time.
Every point measured and documented before energization. These measurements define the installation’s baseline condition.
The HQI of every splice is tracked over time from that reliable baseline to detect the slightest deviation.
Have all your busways checked and require Hotspot Tracking commissioning certification to ensure the long-term reliability of your installations.
